Aluminum Formwork Accessories Before removing Stub Pin in Formwork, set up a work platform to ensure security. At least two people should work together. The removal of the top die must wait for the concrete strength to reach the early demolition conditions, the removal of the top die must be gradually transferred down, must not remove all the pin and wedge, and then remove a whole face of the template. In the process of demolishing the mold, if the concrete is found to have sticky mold and other phenomena, it is necessary to suspend the demolition and analyze the reasons. The removed aluminum plate should be removed immediately with a scraper dirt on the aluminum plate, and brush release agent in time. The bending and deformed Stub Pin in Formwork during construction should be delivered to the processing plant for correction in time. The removed parts should be cleaned and counted in time, and transferred to the corresponding operating layer. The removed aluminum mold is transported to the upper layer through reserved transfer holes or floor holes; Scattered fittings are carried through the stairs.Aluminum Formwork Accessories website:http://www.hbbestbuyhardware.com/aluminum-formwork-accessies/